Series

Finding the Interval of Convergence for a Power Series

Finding the Interval of Convergence for a Power Series

The interval of convergence for a power series is the set of all x-values for which the series converges to a finite sum, essentially defining the domain where the infinite series accurately represents a function.

Series & Limits#19

Taylor Polynomial Generator

Degree-\(n\) Taylor/Maclaurin polynomial centered at \(a\), with error check.

Use our Series Convergence Calculator to get the answer instantly.

What is the Interval of Convergence?

The interval of convergence is the range of real numbers for which a power series, centered at a point ‘c’, yields a finite value. This is the domain where the series behaves like a well-defined function. Outside this interval, the series diverges, meaning its sum approaches infinity or oscillates without settling.

What is the Interval of Convergence?

Every power series converges at least at its center, ‘c’, making the interval of convergence never empty. The behavior of the series at the endpoints of this interval requires careful, separate analysis. Convergence can vary from absolute to conditional, or even diverge.

How to Find the Interval of Convergence

To find the interval of convergence, you primarily use the Ratio Test. This determines the radius of convergence. Then you test the endpoints of the resulting interval individually.

Stationery items like a ruler, pencils, pens, and a card

Here are the steps to follow to determine the interval of convergence for a power series

\sum_{n=0}^{\infty} a_n (x-c)^n

:

    • Identify the Center and General Term: First, identify the center ‘c’ of the power series and the general term
      a_n (x-c)^n
      .
    • Apply the Ratio Test: Use the Ratio Test by calculating the limit:
      L = \lim_{n\to\infty} \left| \frac{a_{n+1}(x-c)^{n+1}}{a_n(x-c)^n} \right|
      Simplify this expression to isolate the
      |x-c|
      term. The Ratio Test states that the series converges if
      L < 1
      .
    • Determine the Radius of Convergence (R): Set the simplified limit
      L < 1
      and solve for
      |x-c|
      . This will give you
      |x-c| < R
      , where R is the radius of convergence. If
      L = 0
      , then
      R = \infty
      (convergence for all real x). If
      L = \infty
      , then
      R = 0
      (convergence only at the center x=c).
    • Form the Open Interval: The preliminary open interval of convergence is
      (c - R, c + R)
      .
    • Test the Endpoints: The Ratio Test is inconclusive when
      |x-c| = R
      , so you must test each endpoint separately. Substitute
      x = c - R
      into the original power series and determine if the resulting numerical series converges or diverges using other tests (e.g., p-series test, alternating series test, integral test, comparison tests). Repeat this for
      x = c + R
      .
    • Write the Final Interval: Combine the open interval with any endpoints that converged to form the final interval of convergence.

Worked Example 1: Finding the Interval of Convergence

Let’s find the interval of convergence for the series

\sum_{n=1}^{\infty} \frac{(x-3)^n}{n}

.

  1. Identify Center and General Term: The center is
    c = 3
    . The general term is
    a_n (x-c)^n = \frac{(x-3)^n}{n}
    , so
    a_n = \frac{1}{n}
    .
  2. Apply the Ratio Test:
    L = \lim_{n\to\infty} \left| \frac{(x-3)^{n+1}/(n+1)}{(x-3)^n/n} \right|
    L = \lim_{n\to\infty} \left| \frac{(x-3)^{n+1}}{n+1} \cdot \frac{n}{(x-3)^n} \right|
    L = \lim_{n\to\infty} \left| (x-3) \cdot \frac{n}{n+1} \right|
    L = |x-3| \lim_{n\to\infty} \frac{n}{n+1}
    L = |x-3| \cdot 1 = |x-3|
  3. Determine the Radius of Convergence (R): For convergence,
    L < 1
    , so
    |x-3| < 1
    . Thus, the radius of convergence is
    R = 1
    .
  4. Form the Open Interval: The open interval is
    (3 - 1, 3 + 1) = (2, 4)
    .
  5. Test the Endpoints: For
    x = 2
    : Substitute into the original series:
    \sum_{n=1}^{\infty} \frac{(2-3)^n}{n} = \sum_{n=1}^{\infty} \frac{(-1)^n}{n}
    This is the alternating harmonic series, which converges by the Alternating Series Test. For
    x = 4
    : Substitute into the original series:
    \sum_{n=1}^{\infty} \frac{(4-3)^n}{n} = \sum_{n=1}^{\infty} \frac{1^n}{n} = \sum_{n=1}^{\infty} \frac{1}{n}
    This is the harmonic series, which diverges (a p-series with
    p=1
    ).
  6. Write the Final Interval: Since the series converges at
    x=2
    and diverges at
    x=4
    , the interval of convergence is
    [2, 4)
    .

Worked Example 2: Series with Infinite Radius of Convergence

Let’s find the interval of convergence for the series

A 3D rendering of the infinity symbol on a white surface.
\sum_{n=0}^{\infty} \frac{x^n}{n!}

.

  1. Identify Center and General Term: The center is
    c = 0
    . The general term is
    a_n x^n = \frac{x^n}{n!}
    , so
    a_n = \frac{1}{n!}
    .
  2. Apply the Ratio Test:
    L = \lim_{n\to\infty} \left| \frac{x^{n+1}/(n+1)!}{x^n/n!} \right|
    L = \lim_{n\to\infty} \left| \frac{x^{n+1}}{(n+1)!} \cdot \frac{n!}{x^n} \right|
    L = \lim_{n\to\infty} \left| x \cdot \frac{n!}{(n+1)!} \right|
    L = |x| \lim_{n\to\infty} \frac{1}{n+1}
    L = |x| \cdot 0 = 0
  3. Determine the Radius of Convergence (R): Since
    L = 0
    for all values of x,
    L < 1
    is always true. This means the radius of convergence is
    R = \infty
    .
  4. Form the Open Interval: The open interval is
    (-\infty, \infty)
    .
  5. Test the Endpoints: Since
    R = \infty
    , there are no finite endpoints to test. The series converges for all real numbers.
  6. Write the Final Interval: The interval of convergence is
    (-\infty, \infty)
    . This is the power series for
    e^x
    , which converges everywhere.

What’s Radius of Convergence and Why is it Important?

The radius of convergence (R) is a non-negative number (or infinity) that describes the distance from the center ‘c’ of a power series to the boundary of its interval of convergence. It tells you how far out from the center you can go before the series is guaranteed to diverge.

A man thinking in front of a blackboard with a physics equation.

Its importance lies in defining the domain over which a power series can reliably represent a function. For example, if you’re using a Taylor series to approximate a function, the radius of convergence tells you the range of x-values where that approximation is valid and accurate. It’s a fundamental concept in complex analysis, where it defines the radius of the largest open disk centered at ‘c’ where the series converges.

Common Mistakes When Finding the Interval of Convergence

Even experienced students can make specific errors when determining the interval of convergence. These three mistakes are often seen:

A child covering their face with question marks, suggesting confusion or mistakes.
  • Forgetting to Test the Endpoints: This is by far the most common mistake. The Ratio Test is inconclusive at the endpoints

    x = c \pm R
    , meaning it doesn’t tell you whether the series converges or diverges at those specific values. You must substitute each endpoint back into the original series and apply a different convergence test (like the Alternating Series Test, p-series test, or Integral Test) to determine if they should be included in the final interval. Failing to do so can lead to an incorrect interval, such as an open interval when it should be closed or half-open.
  • Incorrectly Solving the Inequality from the Ratio Test: After applying the Ratio Test and simplifying to

    |x-c| < R
    , some students might incorrectly solve for x, especially when dealing with negative values or absolute values. Remember that
    |x-c| < R
    means
    -R < x-c < R
    , which simplifies to
    c-R < x < c+R
    . A sign error here will completely shift or invert your interval.
  • Errors in Applying Endpoint Tests: Once you substitute an endpoint, you’re left with a numerical series. Incorrectly applying tests for numerical series (e.g., misidentifying a p-series, misapplying conditions for the Alternating Series Test, or making algebraic errors in a comparison test) will lead to wrong conclusions about endpoint convergence. Always double-check your conditions for each test.

When Radius of Convergence is 0 or Infinity

The radius of convergence (R) can indeed be 0 or infinity, representing specific scenarios for the series’ convergence behavior.

Converging railway tracks extending into the distance under a dramatic sky

When R = 0: This means the power series converges only at its center,

x = c

. For any other value of x, no matter how close to c, the series diverges. This happens when the limit L in the Ratio Test evaluates to infinity, meaning

\lim_{n\to\infty} \left| \frac{a_{n+1}}{a_n} \right| = \infty

. In such cases, the interval of convergence is simply the single point

{c}

.

When R = ∞: This indicates that the power series converges for all real numbers,

x \in (-\infty, \infty)

. This occurs when the limit L in the Ratio Test evaluates to 0, meaning

\lim_{n\to\infty} \left| \frac{a_{n+1}}{a_n} \right| = 0

. In this scenario, there are no finite endpoints to test, and the series converges everywhere on the real number line.

Interval of Convergence vs. Radius of Convergence

While closely related, the interval of convergence and the radius of convergence describe different aspects of a power series’ behavior. The radius of convergence (R) is a single non-negative number (or infinity) that defines the half-width of the convergence region around the series’ center. It’s the maximum distance from the center for which the series is guaranteed to converge. The interval of convergence, on the other hand, is the actual set of all x-values for which the series converges. It is the specific range

A yellow measuring tape with numbers indicating length
(c-R, c+R)

with the inclusion or exclusion of the endpoints determined by separate tests. The radius of convergence gives you the size. The interval of convergence gives you the exact location and boundaries, including endpoint behavior.

Sources: Interval of Convergence –

Frequently asked questions

Can differentiating or integrating a power series change its radius of convergence?

No, differentiating or integrating a power series does not change its radius of convergence. The radius R remains the same for the original series and its derived or integrated series.

Can differentiating or integrating a power series change its interval of convergence?

Yes, while the radius of convergence remains unchanged, differentiating or integrating a power series can alter the convergence behavior at the interval’s endpoints. Therefore, the interval of convergence might change from open to closed, or vice versa, at the endpoints.

Why is the interval of convergence never empty?

The interval of convergence is never empty because every power series is guaranteed to converge at least at its center (x = c). At this point, the series simplifies to just its first term, which is always a finite value.

Calculators for this topic

Get new calculus guides by email

Free worked examples and new calculators, at most once a day. Unsubscribe with one click.

Leave a comment

Your email address will not be published. Required fields are marked *